Bluelab Guardian Monitor Wi-Fi pH / Conductivity EC/TDS / ºC

Details

The Guardian BLUELAB is a fixed meter for EC, pH and temperature levels of irrigation water. This meter allows the grower to optimize these parameters for each phase of cultivation. It is used for hydroponics or measuring irrigation water in soil cultivation.

Professional EC, temperature and pH monitor from the Bluelab brand.

The Guardian meter from BLUELAB eliminates the complexity of working with a meter for each parameter. With this professional Ph and Ec monitor we manage to reduce times and improve the accuracy of the readings taken to achieve an exceptional crop.

The digital screen allows you to see the parameters at a glance, allowing the grower to make the necessary adjustments quickly and efficiently.

This monitor connected to the electrical current can work in constant reading 24 hours a day. You just have to leave the probes in the water and leave the monitor on. You can set up an alarm system so that Guardian Bluelab will alert you if any parameter drops or rises too high.

With just a glance, the Bluelab Guardian Monitor Wi-Fi transmits the 3 critical parameters for successful growth: pH, conductivity and temperature. With built-in Wi-Fi capability, if enabled, the Bluelab Guardian Monitor Wi-Fi can display data in Edenic. This allows you to monitor your nutrient levels from anywhere, at any time.

Product Features:

Built-in Wi-Fi (with disable option)
High/Low pH, Temperature and Conductivity Alarms
Non-Volatile Memory - retains settings in case of power loss
Plant-safe green LEDs with adjustable display brightness
2 meter / 6.6 ft measurement probe cables
110 - 240 VAC (mains power)
Interchangeable power plug
Replaceable Bluelab pH probe (with BNC connection)

Bluelab Guardian Monitor Wi-Fi pH / Conductivity EC/TDS / ºC Specifications

Brand: Bluelab
Model: Guardian Monitor
PH range: 0.0 - 14.0 pH
Resolution: 0.1 pH
Accuracy (at 25°C/77°F):± 0.1 pH
Conductivity Range:0 - 5.0 EC, 0 - 50 CF0 – 2500 TDS (ECx500), 0 – 3500 ppm (ECx700)
Resolution:0.1 EC, 1 CF10 TDS, 10 ppm
Accuracy (at 25°C/77°F): ±0.1 EC, ±1 CF±50 TDS, ±70 ppm
Temperature Range:0 - 50°C
Resolution:1ºC
Accuracy:± 1ºC
Calibration Two points (pH 7.0 and pH 4.0 or pH 10.0) - Not required for temperature and conductivity
Temperature compensation: Yes (if conductivity/temperature probe is in the same solution as the pH probe)
Silent visual alarm (high and low settings)
Adjustable display brightness
Water resistant
Non-volatile memory
Overrange and underrange indicators
Operating environment: 0 - 50°C / 32 - 122°F
Power supply: Input: 100-240 V AC, 50-60 Hz, 5 VA, Output: 5 V DC 1 Amp