In stock
Secret Jardin Dark Street grow box 90x90x178cm (DS90 V4.0)
The Secret Jardin Dark Street V4.0 cabinets are lined with an M210D mylar fabric with a coated effect that reflects 95% of the light, distributing it evenly and avoiding hot spots. Its structure is robust but at the same time light thanks to its 16 millimeter diameter tubes. In addition, its walls are reinforced thanks to the Space Booster system, which ensures that the walls of the closet remain more rigid, preventing the extractors from bulging inward.
They have multiple extraction sleeves and windows for all possible configurations. The Secret Jardin Dark Street V4.0 cabinets include a practical set of accessories consisting of the Space Booster system and the Web It fastening network.
It is made up of light aluminum tubes that are joined together by means of joining pieces to form the structure and a resistant covering fabric. Thanks to its simple assembly scheme, it can be assembled and disassembled in just a few minutes.
Vents TT 100 Dual Fan air extractor 145/187 m³/h (100mm)
One of the best options for the extraction/intraction of your crop. With a sufficient flow rate for most cabinets, this extractor has 2 speeds. Essential for optimal functioning of your grow box. Plants stop growing if the temperature is excessive.
It has a new wall fixing system. which allows the extractor to be taken down for cleaning without having to unscrew the fixing system from the wall. It is one of the quietest on the market. It is one of the quietest on the market.
Aluconnect flexible aluminum tube for air extraction - 3m (102mm)
It is a flexible laminated aluminum and polyester tube with an encapsulated steel chassis for air extraction and induction. Easy to install and very economical. Formed by three layers of aluminum and two of polyester perfectly joined together, the composition of which results in a strong and flexible sheet that wraps and covers a spiral steel core.
It is used in mechanical ventilation systems, kitchen hoods, couplings to fans, conditioners and connections of air diffusion ducts, linear and circular diffusers, extraction vents, etc.
Carbon anti-odor filter 160 m³/h (Ø100mm)
A range of filters with a metal body designed for the needs of growers. Guaranteed results, simple, economical way of use and available in a wide variety of sizes.
Inline drying and dehumidification is used in the filling process to ensure that the coal is in its best condition before compaction and, the special expansion foam in the neck ensures that the compaction rate is high in all the time. Avoid low-quality filters with poor compaction that allow volatile odors to escape before coming into contact with the carbon.
Pure Filter mouthpieces are made of lightweight aluminum and optimized for the size of channeling in ducts with flexible tube. No more complications when installing insulated pipes! We recommend replacing the external dust filter every 3-6 months, depending on the saturation level. For this reason, an easy-to-replace replacement dust filter is supplied so that you can replace and clean the dust filters when it suits you best.
Clamp / Metal flange Vents for tubes and extractors 90-110mm (100mm)
The use of metal clamps can be very useful to secure connection tubes with extractors, carbon filters, T-joints or diameter reductions. High quality metal clamp with star tip for better tightening.
Reinforced stuco cultivation reflector for CFL fluorescent bulbs (47x47cm)
The reflective surface of the reflector is finely textured to promote light diffusion. The weight is approximately half that of steel and its heat dissipation capacity is unbeatable. Stucco reflector, made of high-gloss aluminum and fully anodized to prevent loss of shine over time (built-in ceramic cap).
Hydrofarm Xtrasun Ballast / Ballast for HPS / MH Bulbs (400W)
The ballast or reactor, in addition to helping with ignition, is responsible for limiting the current in the discharge process. For the modern operation of fluorescent lamps, they offer high efficiency, long life, comfortable and uniform light based on the reduction of power loss and the increase in luminous efficiency. Optilight ballast with metal box and terminal strip connections for greater safety.
Mixed Bulb for Growth and Flowering Hydrofarm Xtrasun HPS Grolux (400W)
This bulb, like all Grolux bulbs, promotes both growth and flowering thanks to its red and blue spectrum. More reddish spectrum, similar to that of autumn afternoons. The Hydrofarm range of lamps is characterized by the quality of the materials, the manufacturing techniques and the quality control itself, which guarantee their performance and reliability.
HPS lamp from the manufacturer Hydrofarm, known for offering high quality products for our indoor growing facility, such as its electronic ballast with power regulator. This range of bulbs has a dual spectrum, that is, they offer a range of colors that will be used for both growth and flowering, offering satisfactory results in both phases. Ideal for those who do not want to buy two bulbs or who do not want to complicate their lives.
Hanging system / 2x Pulleys for Easy Roller crop reflectors (2x5kg)
Pulley system to raise and lower the lamps in order to adapt the height of the reflector to the growth of the plants. Ideal for hanging the lamp without the use of chains.
Secret Jardin Dark Street grow box 90x90x178cm (DS90 V4.0)
Vents TT 100 Dual Fan air extractor 145/187 m³/h (100mm)
Aluconnect flexible aluminum tube for air extraction - 3m (102mm)
Carbon anti-odor filter 160 m³/h (Ø100mm)
Clamp / Metal flange Vents for tubes and extractors 90-110mm (100mm)
Ballast / Ballast for HPS / MH Bulbs (400W)
Mixed Bulb for Growth and Flowering Hydrofarm Xtrasun HPS Grolux (400W)
Hanging system / 2x Pulleys for Easy Roller crop reflectors (2x5kg)
Type of product | Cultivation kit |
---|---|
Condition | New |
Brand | Multi-Brand |
Country of origin | Spain |
Product weight | 9 |
Length | 90 Centimetres |
Width | 90 Centimetres |
Height | 178 Centimetres |
Login and Registration Form