Complete HPS kit with Growbox 80 + Fan Filter + Light Kit (250W)

Configure your own grow kit

• You can choose between the following models:
  • 80x80cm growbox
  • Mixed bulb for growth and flowering (250W)
  • Air Extractor TT 100

Grow Tent (80x80cm)

You can choose the 80cm GrowBox that best suits your needs. All of them have a high-quality reflector. The tents are characterized by their versatility in adapting to the demands of any crop, even those with specific climate, space and modularity requirements.

They are made up of light aluminum tubes, which are joined together by means of assembly pieces to form the structure, and a strong and opaque cover fabric. The upper part of the structure is strong enough to support all the accessories and the filter.

One of the best options for the extraction / intracción of your crop. With a sufficient flow for most cabinets this extractor has 2 speeds. Essential for an optimal functioning of your culture cabinet. The plants stop growing if the temperature is excessive.

It has a novel system of fixing to the wall. that allows to lift the extractor for cleaning without having to unscrew the fixing system of the wall. It is one of the quietest in the market. It is one of the quietest in the market.

Aluconnect aluminum flexible tube for air extraction - 3m (102mm)

It is a flexible tube of laminated aluminum and polyester with encapsulated steel chassis for the extraction and induction of air. Easy to install and very economical.Formed by three layers of aluminum and two perfectly bonded polyester, whose composition is followed by a strong and flexible sheet that wraps and coats a spiral steel core.

It is used in mechanical ventilation systems, kitchen hoods, couplings to fans, air conditioners and air diffusion duct connections, linear, circular, extraction, etc.

Carbon Factory Anti-odor Filter Pure Factory 250mm 160 m³ / h (Ø100mm)

Range of filters with metallic body designed for the needs of growers. Guaranteed results, simple, economical use mode and available in a wide variety of sizes.

Line drying and dehumidification is used in the filling process to ensure that the coal is in its best condition before compaction, and the special expansion foam in the neck ensures that the rate of compaction is high at all times. Avoid low quality filters with bad compaction that allow volatile odors to escape before coming into contact with carbon.

The Pure Filter mouthpieces are made of lightweight aluminum and optimized for the size of ducting with flexible tubing. No more complications when installing insulated pipes! We recommend replacing the external dust filter every 3-6 months, depending on the level of saturation. For this reason, a replacement dust filter is very easy to replace so you can replace and clean the dust filters when it suits you best.

• Made with the best activated carbon RC-4/8 from Australia.
• Less dust and better capacity.
• Bottom and lightweight aluminum collar.
• Optimum embouchure size for flexible channeling.
• Clamp / Metal Flange Vents for tubes and extractors 90-110mm (100mm)

The use of metal clamps can be very useful to fix the connection tubes with extractors, carbon filters, T-joints or diameter reductions. High quality metal clamp with star tip for better tightening.

Granulated Reflector / Stucco for the cultivation (31x50cm)

The reflector surface of the reflector is finely textured to promote diffusion of light. The weight is about half that of steel and its heat dissipation capacity is unbeatable. Stucco reflector, made of high gloss aluminum and fully anodized to avoid the loss of brightness over time (ceramic cap incorporated).

Ballast / Reactor for HPS / MH Bulbs (250W)

The ballast or ballast, in addition to helping the ignition, is responsible for limiting the current in the discharge process. For the modern operation of the fluorescent lamps, they offer us a high efficiency, long duration, comfortable and uniform light based on the reduction of the loss of power and the increase of the luminous efficacy. Optilight ballast with metal box and terminal strip connections for greater safety.

Specifications of Complete HPS kit with Growbox 80 + Fan Filter + Light Kit (250W)

Air extractor TT 100 Dual Fan 145/187 m³ / h (100mm)

• Model TT 100
• Extractor / inductor of high quality made of PVC.
• Very silent and easy to install.
• Essential for an optimal functioning of your culture cabinet.
• Diameter: 100mm
• Air flow: Min 145m³ / h / Max 187 m³ / h
• Sound level at 3m: Min 28 dBA / Max 25 dBA
• Voltage V / Hz: 1-230
• Consumption: Min 21W / Max 33W
• Current: Min 0.12A / Max: 0.20A
• RPM: Min 2450 / Max 2500
• Dimensions: see photo
• Weight: 1.5kg
• Aluconnect aluminum flexible tube for air extraction - 3m (102mm)
• Aluconnect
• Aluminum flexible tube
• Laminated polyester
• Steel encapsulated chassis
• Working temperature: -30ºC to + 140ºC
• Working pressure: The internal pressure that resists is 250 mm.c.d.a.
• Air passage speed: Max .: 30 m. / sg.
• Fire resistance: Class M1
• Diameter: 102mm (compatible with all 100mm extractors)
• Length: 3m

Carbon Factory Anti-odor Filter 160 m³ / h (Ø100mm)

• 4mm CTC70 activated carbon filter
• Metallic body
• Easy to assemble and install
• Connection mouth (diameter): Ø100mm
• Length: 250mm
• Extraction power: 160 m3 / h

Clamp / Metal Flange Vents for tubes and extractors 90-110mm (100mm)

• Brand: Vents
• Model: 100
• High quality metal clamp
• Star point for better tightening
• Dimensions (diameter): 90-110mm

Ballast / Starter for HPS / MH Lamps (250W)

• Magnetic ballast
• Compatible with all kinds of sodium lamps (HPS) and metal halide (MH) 250W
• Electronic start
• Extra silent
• Less electrical losses and higher light output
• Base CEE Schuko 7/7 with grounding 1.5m
• Connector to IEC 50cm lamp (with possibility of extension)
• Built-in thermal protection PTC

Hanging system / 2x Pulleys for Easy Roller crop reflectors (2x5kg)

• Easy Roller
• Set of two units.
• Cable length 110cm
• Maximum weight of 10kg (each pulley holds 5kg)

Shipping content

• Complete HPS kit with Growbox 80 + Fan Filter + Light Kit (250W)
• Air extractor TT 100 Dual Fan 145/187 m³ / h (100mm)
• Aluconnect Aluminum Flexible Tube - 3m (102mm)
• 2x Metal Clamp / Flange Vents for tubes and extractors 90-110mm (100mm)
• Carbon Factory Anti-odor Filter 160 m³ / h (Ø100mm)
• Mixed Bulb for Growth and Flowering HPS (250W)
• Ballast / Starter for HPS / MH Lamps (250W)
• Connection cable to IEC bulb (50cm)
• Power cord
• Granulated Reflector / Stucco for the cultivation of (31x50cm)
• Ceramic cap (E40)
• Cable IEC-60320-C13 Male (4m)
• Hooks (x2)
• Hanging system / 2x Easy Roller reflector pulleys (2x5kg)