GSE EC Controller Min/Max Speed / Humidity / Temperature 10A (FC17)

This EC exhaust fan controller has temperature, humidity and minimum speed settings on three knobs for the exhaust fan.

The EC extractor controller is supplied with a 4m long cable including an RJ45 connector for the extractor fan and a 4m long temperature and humidity sensor. Comes as a finished product. The output signal is a 0-10V or PWM (Pulse Width Modulation) signal that can be configured using a jumper.

Extremely low current consumption allows you to operate the EC extractor controller without a power supply, powered directly from the EC extractor.

Setting range:

• Temperature: 20C° to 30C°
• Humidity: 30% - 100%
• Minimum speed: off, 20% to -100%

Is the power supply necessary?

With or without power supply? Depending on your EC extractor, you need a supply current > 10V DC> 10 mA and a PWM signal, you can run the controller without a power supply of its own. You must obtain this information from the Technical Data Sheet of your EC extractor. (Ruck or Can-Fan) EBM, Primaklima, Systemair Motors are working with PWM Signal)If EC exhaust fan provides 2-wire signal-GND then yes, If EC fan provides 3-4 wire signal-GND-VDC > ;10V/4mA, no power supply required.

Specifications of GSE EC Controller Min/Max Speed / Humidity / Temperature 10A (FC17)

• Brand: GSE Systems
• Model: FC17-EU-RJ
• Housing: height = 90 mm, width 58 mm, height 40 mm
• Voltage: 12 VDC
• Power: 10mA
• 5V digital sensor
• Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Humidity accuracy +/-3% RH maximum tolerance at 55% RH
• Protection class: IP 20
• Weight: 307g

Shipping content

• GSE EC Controller Min/Max Speed / Humidity / Temperature 10A (FC17)
• Instructions for use