pH Meter / Tester and Temperature ATC HM Digital (pH-200 )

The PH-200 is an advanced, micro-processor-based handheld, watertight pH meter with superior accuracy. It can be used for testing the acidity or alkaline levels of almost any liquid, in a wide variety of applications, provided the liquid contains less than 50% alcohol and a conductivity of at least 10 µS (5 ppm in TDS).

The PH-200 will give you quick and precise results, eliminating the need for strips or chemicals. It also measures temperature in both Celsius and Fahrenheit. The meter incorporates automatic temperature compensation (ATC) to accommodate for discrepancies in temperature that would naturally occur. The PH-200 comes factory-calibrated and also includes auto-ranging digital calibration, so re-calibration is a simple process.

• Measures pH and Temperature
• Auto-ranging three point calibration with digital fine tuning
• Includes 4 pH buffer solution in a sponge embedded in a clear cap
• Waterproof housing
• Simultaneous temperature display
• Measurement Range: 0-14 pH
• Digital automatic calibration (one point), with digital fine tuning
• Auto-off function, data-hold function and low-battery indicator
• Display: large and easy-to-read LCD screen includes simultaneous temperature reading
• Factory Calibrated: The PH-200 meter is three-point factory calibrated to 4, 7, and 10 pH. The meter can be recalibrated with digital calibration using the push buttons, rather than a screwdriver.
• Includes a  of cap, batteries, lanyard, and 1 packet pH 7.0 calibration buffer (additional calibration buffers are sold separately)

Specifications

• pH Range: 0 - 14 
• Temperature Range: 0-80 °C; 32-176 °F 
• Resolution: 0.01 pH; Temperature resolution is 0.1 °C/F 
• Accuracy: +/- 0.1 pH 
• Calibration: Digital automatic calibration (one point) with digital fine tuning
• Electrode: Replaceable glass sensor and reference tube electrodes 
• Housing: IP-67 Waterproof (submersible; floats) 
• Power source: 3x1.5V button cell batteries (included) 
• Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches) 
• Weight: 96.4 g (3.4 oz) <

Shipment contents

• pH Meter / Tester and Temperature ATC HM Digital (pH-200 )
• Instructions
• Lanyard
• Batteries (Already installed)
• 20ml packet of 7.0 calibration buffer solution.